Single Bore Housings

Home / Single Bore Housings

 

Cartridge filter is made up of two part

Cartridge : known as Filtering device
Housing : Cartridge is used in line by proper housing

To design the Housing must following these Important Parameters :

  • Operating Pressure
  • Operating Temperature
  • Material used for Constructions
  • Clean Pressure Drop Available for the Filter
  • Ease in operating
  • Proper Sealing Material
  • End Connections of the Housings.

We are the leading manufacturer and exporter company of designing the Filter Housing with using above parameters and give Polypropylene, Polycarbonate, C.S., M.S., M.S.R.L., S.S. 304, S.S. 316 and S.S. 316L

Single Bore Housings Manufacturer

 

Ask Price

We are the leading manufacturer and exporter company of Industrial Filter, Cartridges Filter, Filter Cartridges, Single Bore Housings , Polypropylene Spun Filter, Resin Cartridge Filter, S.S. Cartridges, Sintered Powder Cartridge, Pleated Cartridges, Pleated Polypropylene Cartridge and PTFE Cartridge Manufacturers in all over the India.

  • Providing Duplex Filters for Continuous Process Applications.
  • Providing Filter with Pressure Gauges or D.P. Gauge for monitoring Filter.
  • Providing Filter Housings as per ASME Sec VIII, Div. I.

Frequently Asked Questions

1. What is a single bore filter housing?

+

A single bore filter housing is an inline pressure vessel designed to house a single filter cartridge. It is widely used for low to medium flow rates in point-of-use liquid or gas purification.

2. What materials are single bore housings made from?

+

Single bore housings are available in molded Polypropylene, clear Polycarbonate, and fabricated Stainless Steel (SS304, SS316, SS316L), Mild Steel, or MS Rubber-Lined vessels.

3. What cartridge sizes fit in single bore housings?

+

Housings are manufactured to accept standard 10", 20", 30", and 40" cartridge lengths with Double Open End (DOE) or Single Open End (Code 7 / 222 / 226) end cap connections.

4. Can single bore housings be equipped with pressure gauges?

+

Yes, housings can be fitted with inlet/outlet pressure gauges or differential pressure (DP) switches to signal when cartridge replacement is necessary.

5. What sealing materials are used for single bore housings?

+

Leak-proof sealing is achieved using durable O-rings in Nitrile (NBR), EPDM, Viton, Silicone, or PTFE depending on the fluid chemical composition and temperature.

Our Products

Owned & Powered by ::#1 Vinayak InfoSoft - SEO Company Ahmedabad :: Disclaimer :: SiteMap